This test station is designed especially for
different connector on both sides patch cord
(such as FC-SC, SC-LC, SC-LC…), the REF for
insertion and return loss can set one time for
those kind of patch cord, no need to change
standard patch cord and interchange testing
port connector on tester( Especially 2.5mm
and 1.25mm interchange). For the tested patch
cord, APC end no need to manually set standard
patch cord length if PC end measured shortest
length is 2.2M.One key setting insertion and
return loss REF value, is much more convenience
for operators and easy training. This device can
directly do the label report setting and real time
data printing.Integrating sphere design will make
easier measurement on simplex patch cord,
duplex patch cord, hybrid patch cord, and LC
duplex uniboot patch cord.